Electrician

Syllabus : Syllabus for ITI Trade Electrician
Trade Type : Engineering
Trades Duration: Two Year
Trade Sector : Power

ITI trade Electrician is powered by NCVT. ITI trade Electrician is a job oriented trade ITI trade Electrician is suitable for government job and private job. This ITI trade Electrician is very powerful for self-empowerment. This ITI trade Electrician is perfectly design to fulfill industrial requirement of Indian Industries as well as International industries.
आईटीआई ट्रेड इलेक्ट्रीशियन एनसीवीटी द्वारा संचालित है। आईटीआई ट्रेड इलेक्ट्रीशियन एक जॉब ओरिएंटेड ट्रेड है आईटीआई ट्रेड इलेक्ट्रीशियन सरकारी नौकरियों और निजी नौकरियों के लिए उपयुक्त है। यह आईटीआई ट्रेड इलेक्ट्रीशियन आत्म-सशक्तिकरण के लिए बहुत शक्तिशाली है। यह आईटीआई ट्रेड इलेक्ट्रीशियन पूरी तरह से भारतीय उद्योगों के साथ-साथ अंतर्राष्ट्रीय उद्योगों की औद्योगिक आवश्यकता को पूरा करने के लिए डिज़ाइन किया गया है।

Electricians have a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs.
इलेक्ट्रीशियन के पास स्वरोजगार, संविदात्मक रोजगार से लेकर औद्योगिक नौकरियों तक रोजगार की व्यापक गुंजाइश है।
After successful completion of this course, Electricians can aspire to become Electrical Contractors by acquiring the ‘B” licence from the Electrical Licence Board.
इस कोर्स को सफलतापूर्वक पूरा करने के बाद, इलेक्ट्रीशियन इलेक्ट्रिकल लाइसेंस बोर्ड से ‘बी’ लाइसेंस प्राप्त करके विद्युत ठेकेदार बनने की इच्छा रख सकते हैं।
They can set up their own Rewinding and servicing of Domestic Equipment shop.
वे अपनी खुद की रीवाइंडिंग और घरेलू उपकरणों की दुकान की सर्विसिंग स्थापित कर सकते हैं।
Job opportunities are wide open in Defence, Railways, Transport, Ship Building, Electricity Board, various Industries etc.
रक्षा, रेलवे, परिवहन, जहाज निर्माण, बिजली बोर्ड, विभिन्न उद्योगों आदि में रोजगार के व्यापक अवसर हैं
They can also go for further higher studies after successful completion of course.
कोर्स सफलतापूर्वक पूरा करने के बाद वे आगे की उच्च शिक्षा के लिए भी जा सकते हैं।
Students who have completed this course have found employment in the following areas:
Service/Maintenance Technician for domestic appliances in Reputed Companies
Winder of Electrical Motors in winding shop
Contractor for domestic wiring and industrial wiring
Armature winder of Electrical fans and motors
Electrical appliance repair in electrical shops
Indian Railway (Asst. Driver, Tech. Gr. III, Appr. Technician)
Local Electricity Board
Assembler of Electrical control Gears
Telephone Department
Installation and Testing division of Auditorium and Cinema Hall
Factories
As Instructor in Govt./Private ITI/ITC
Merchant Navy
Indian Air Force
Self-Employment in Service Centre

Trades Summery:

(i) Apply safe working practices
(ii) Comply environment regulation and housekeeping
(iii) Prepare profile with an appropriate accuracy as per drawing.
(iv) Prepare electrical wire joints, carry out soldering, crimping and measure insulation resistance of underground cable.
(v) Verify characteristics of electrical and magnetic circuits.
(vi) Install, test and maintenance of batteries and solar cell.
(vii) Estimate, Assemble, install and test wiring system.
(viii) Plan and prepare Earthing installation.
(ix) Plan and execute electrical illumination system and test.
(x) Plan and execute electrical illumination system and test.
(xi) Perform testing, verify errors and calibrate instruments.
(xii) Plan and carry out installation, fault detection and repairing of domestic appliances.
(xiii) Execute testing, evaluate performance and maintenance of transformer.
(xiv) Execute testing, and maintenance of DC machines and motor starters.
(xv) Plan, Execute commissioning and evaluate performance of DC machines.
(xvi) Distinguish, organise and perform motor winding.
(xvii) Plan, Execute commissioning and evaluate performance of AC motors.
(xviii) Execute testing, and maintenance of AC motors and starters.
(xix) Plan, execute testing, evaluate performance and carry out maintenance of Alternator / MG set.
(xx) Execute parallel operation of alternators.
(xxi) Assemble simple electronic circuits and test for functioning.
(xxii) Assemble accessories and carry out wiring of control cabinets and equipment.
(xxiii) Perform speed control of AC and DC motors by using solid state devices.
(xxiv) Detect the faults and troubleshoot inverter, stabilizer, battery charger, emergency light and UPS etc.
(xxv) Erect overhead domestic service line and outline various power plant layout
(xxvi) Examine the faults and carry out repairing of circuit breakers.
(xxvii) Plan, assemble and install solar panel.
(xxviii) Interpret & use company and technical communication
(xxix) Demonstrate knowledge of concept and principles of basic arithmetic, algebraic, trigonometric, and statistics and apply knowledge of specific area to perform practical operations.
(xxx) Understand and explain basic science in the field of study including friction, simple machine and heat and temperature
(xxxi) Read and apply engineering drawing for different application in the field of work.
(xxxii) Understand and explain the concept in productivity, quality tools, and labour welfare legislation and apply such in day to day work to improve productivity & quality.
(xxxiii) Explain energy conservation, global warming and pollution and contribute in day to day work by optimally using available resources.
(xxxiv) Explain personnel finance, entrepreneurship and manage/organize related task in day to day work for personal & societal growth.
(xxxv) Understand and apply basic computer working, basic operating system and uses internet services to get accustomed & take benefit of IT developments in the industry.